Need to find an original oil pan for a V-8 mustang ii.This is all i need to finish my conversion.Cant find any aftermarket ones.Or at least mustang ii specific ones.If anyone has one email me at boggs29@cableone.net. I need one ASAP.
The MII pans are very hard to find. Sometimes you can get them on e-bay. You can get a low profile front sump racing pan from summit, jegs, ect, (Milodon). I have seen them in the e-bay stores as well.
Do a search on the Toledo Ohio Craig'sList under autoparts for mustang. I think the ad was posted March 12, but as of a week ago he still had most of the stuff. He had an oil pan and pickup listed for like $100. Not sure if he would ship or not. I bought a couple of II things from him. You need to call the phone number in the ad, email goes to his wife.
And I just deleted his phone number from my cell tonight. :embarassed: His name is Todd.
hth,
Russ
I got one for a 302 from Kragen. It is a standard front sump oil pan and has a little more angle than a MII, but should work. Another option is to look at performance pans from companies like milodoon.
http://www.oreillyauto.com/site/c/search/Oil+Pan+-+Performance/2332P/C0332.oap?keyword=oil+pan&year=1976&make=Ford&model=Mustang%2BII&vi=1134571 (http://www.oreillyauto.com/site/c/search/Oil+Pan+-+Performance/2332P/C0332.oap?keyword=oil+pan&year=1976&make=Ford&model=Mustang%2BII&vi=1134571)
Bought the pan,pickup,and the Mii small bellhousing from the guy in Toledo!
Quote from: vonkysmeed on April 08, 2010, 10:17:39 PM
I got one for a 302 from Kragen. It is a standard front sump oil pan and has a little more angle than a MII, but should work. Another option is to look at performance pans from companies like milodoon.
Been down that road with the stock 302 pan, it won't work. You need a MII pan or the Milodon.
Quote from: boggs77wgn on April 08, 2010, 11:34:42 PM
Bought the pan,pickup,and the Mii small bellhousing from the guy in Toledo!
Cool! Glad to have helped.
Russ
Quote from: 71pintoracer on April 09, 2010, 07:18:52 PM
Been down that road with the stock 302 pan, it won't work. You need a MII pan or the Milodon.
Ran the stock 302 pan for over a year with no problem.
Quote from: vonkysmeed on April 10, 2010, 11:24:41 AM
Ran the stock 302 pan for over a year with no problem.
In order to get the engine and the swap headers to line up properly in the chassis I had to use the MII pan. But yea, if you don't mind the distribitor sticking up through the hood and the fan 2" past the radiator support then put a stock 302 pan on it. :reek:
Glad to see you found a MII pan boggs, I think you'll be much happier. :)