Thanks to a lot of people, but I can get the round doughnut rubber peice at any autoparts, but thanks for trying to help. I added a picture of the part I needed.
you need the female splined piece that clamps to the rack right? me too. it was a larger diameter on the power racks. speedway and other hot rod places sell a u-joint set up that eliminates the rag joint. i havent gotten around to doing my manual rack swap yet so i couldnt give you the part number.
insted of a female coupler on the rack and column joined by the "rubberdoughnut" looking rag joint, it has two female ends with a small u-joint, like a drive shaft, connecting the two.
http://www.speedwaymotors.com/ProductSummary.aspx?free_text (http://www.speedwaymotors.com/ProductSummary.aspx?free_text)|3/22/2010%209:56:42%20AM=steering+u+joint&deptId=0
bob
edit...for some reason the whole thing didnt show up to click on. go to www.speedwaymotors.com (http://www.speedwaymotors.com) and search steering u joint. if you finish your swap and use one of these, could you list the part number you use?
Will do better that that!
Speedway: Forged Steel Steel coupler
#910-32237 #910-32285
:drunk:
i have one of these for a manual rack if you need. pm me with an offer and shipping will be cod if you want it
OhSix'
I'm going to pick one of those up for my car too. since they have power steering ones too
To all of you, New Era Interprise is sending me one. If it should be the wrong one, I will let you know.
great, thanks for the info!!
bob
Quote from: OhSix9 on March 22, 2010, 06:02:10 PM
i have one of these for a manual rack if you need. pm me with an offer and shipping will be cod if you want it
OhSix'
They sent the wrong peice so, send me a picture first and what year it's off of and we'll talk deal, OK?
It is def the right part with the smaller input splines for the manual rack. i had one for power that i used and the spare from a manual steering car. i can take a pic this evening if you wish but 100% sure i have what you are lookin for.
I PM them and the other part will be on the way shortly but I will still make you an offer as soon as I check my funds. Not a bad idea to have a spare.
hello group just replaced my ragjoint on my 77 wagon.went to kragen oreily first got doorman kit 31002 but the doughnut was too small in daimenter. went for the orther one 31000 and it was large enough to work. what a difference!!!!!thanks to alberto pintopower for all the help and pics to see what its suppose to look like.now im all ready for knotts!!!!!!!!!!!!!!! if only i lived closer to alberto i could have watched him fix my car :hypno: just kidding thanks chris
Awesome Chris!