Pinto Car Club of America
Shiny is Good! => Your Project => Topic started by: dcbchristian on March 20, 2010, 05:42:35 PM
i have a buddy who wants to know if a 2000cc motor would hook up with a 1600 trans. and if not, what has to be done. any help is appreciated.
From looking at bolt spacing on bell's 2.0 and 2.3 I think it would work. I have installed a 1600 trans to a 2.3 using the 1600 bell only thing I had to do was enlarge the 2 dowel holes. Also need to use the 1600 friction disc with the 2.3 pressure plate. Fred :)