Pinto Car Club of America
Shiny is Good! => Your Project => Topic started by: GERBEAR on October 31, 2004, 07:32:04 PM
I just bought a 77 cruisin wagon I need to take the panels off to do some body work, plus I need a wiring harness!
First I would remove the carpet along the sides. Then you will need to remove the moldings that cover the screws. One is at the rear, next to the hatch and the other is next to the door. On my car, the ones at the rear are body color and the ones on the sides are grey or silver. They are both held on by adhesive, so they should be easy to pull off. Once you remove the moldings you will see the screws. If I remember there are 6 or 7 screws. Then you will have to take a putty knife or something to cut thru the calking they used to seal the sides. That is the most difficult part of the whole thing. It will help if you have someone on the inside helping to push.