Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: popbumper on September 21, 2009, 01:48:23 PM

Title: Power vs. Manual brake master cyl
Post by: popbumper on September 21, 2009, 01:48:23 PM
...any physical differences between the two? In terms of reservoir size(s) or construction? Please let me know, thanks. Convering over to power brakes, wondering if I can just pop my new manual master cyl onto my power brake booster and run with it.

RockAuto lists these as difefrent part numbers, which has me wondering....

Chris
Title: Re: Power vs. Manual brake master cyl
Post by: dholvrsn on September 21, 2009, 03:40:41 PM
The fittings are different sizes for starters.
Title: Re: Power vs. Manual brake master cyl
Post by: popbumper on September 21, 2009, 04:25:01 PM
Fittings? As for the brake lines? I realize the manual system has a long "lever" from the brake pedal to the master, where the booster for the power setup has an integral lever...

Please elaborate if you can.

Chris
Text only | Text with Images