Pinto Car Club of America
Shiny is Good! => General Pinto Talk => Topic started by: patcosca on October 17, 2004, 01:34:27 PM
The Sprint I am building has one of these on it. I have never seen one before and thought others may want to duplicate the bracket. I've used solid mounts and have chained engines down in the past, but this is simple and looks great. Due to the file size, I'll post the second picture as a follow up post.
If anyone is interested, I will draw out the dimensions so you can duplicate it. It appears to use a regular engine mount. The bracket bolts to the engine using the bellhousing bolts (on the drivers side) and then to the back of the front crossmember. The notch is for the clutch cable.
Here is the bracket for the back of the front crossmember.