Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: pinto1955 on July 13, 2009, 10:44:58 AM

Title: Neutral Safety Switch for V8 Conversion
Post by: pinto1955 on July 13, 2009, 10:44:58 AM
When making the switch to the v8 and using the Mustang II transmission would you use the safety switch from the Mustang II c4 or the switch from the c4 from the Pinto trans. The plugs are different from the Mustang II compared to the Pinto. Thanks for your help.
Title: Re: Neutral Safety Switch for V8 Conversion
Post by: dholvrsn on July 13, 2009, 12:23:18 PM
You could either swap safety switches or swap and splice pigtails.

I did the latter in a WC T5 into Pinto swap.
Title: Re: Neutral Safety Switch for V8 Conversion
Post by: pinto1955 on July 13, 2009, 10:39:14 PM
So your saying I could use the C4 neutral safety switch from the Pinto trans rather than splice the wires. Thanks.
Text only | Text with Images