Pinto Car Club of America
Shiny is Good! => General Pinto Talk => Topic started by: Starsky and Hutch on June 17, 2009, 08:49:13 AM
Anyone know what style of two way tape was use on the 77-78 french cut head lights
tape was used on them? I had a 78 & have a 77 and was unaware they had any tape at all on those.
Ya they have two way tape down the outside edge,, that laps over the fender and down to a little screw on the front leading edge of the fender,at the bottom .The tape starts right at that bracket carolinia boy gave and sent to me,,,,,,,,and ends at the little screw......Big thanks to cb on this one!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I was in my garage to get the float to try to seal it up and looked at my flattened out fender. Anyways, I saw it on the old one! Almost looks like a strip of glue.
Quote from: r4pinto on June 19, 2009, 06:42:46 PM
I was in my garage to get the float to try to seal it up and looked at my flattened out fender. Anyways, I saw it on the old one! Almost looks like a strip of glue.
yea thats it I`m getting some from the body shop here they said they have that stuff when i get it i`ll post who makes it