Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: fordstuff on June 07, 2009, 09:27:17 AM

Title: 74 PCV for a 2300 question
Post by: fordstuff on June 07, 2009, 09:27:17 AM
on the pcv line. down where it goes in the block there is a metal part. an oil seperator. is there a grommet that goes in there where it sticks into the block to hold it in and keep from having oil leaks or do i silicone seal it in.. thanks. roy ?.
Title: Re: 74 PCV for a 2300 question
Post by: Pinturbo75 on June 07, 2009, 10:20:23 AM
no grommet it just wedges in metal to metal.
Title: Re: 74 PCV for a 2300 question
Post by: fordstuff on June 07, 2009, 01:21:55 PM

ok.. thanks. mines real loose and easily comes out if i wiggle the pcv line. think i'll try siliconing it back in... thanks. roy

Quote from: Pinturbo75 on June 07, 2009, 10:20:23 AM
no grommet it just wedges in metal to metal.
Text only | Text with Images