Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: FlyerPinto on April 29, 2009, 03:22:39 PM

Title: Compatability of body panels - Pinto to Bobcat
Post by: FlyerPinto on April 29, 2009, 03:22:39 PM
I have found rear fender sections (new) that are supposed to fit 71-80 Pintos. I want to be certain they will fit my 77 Bobcats. As far as I know the only differences between the cars was pretty much cosmetic, tail lights, hood, grille etc. I just want to be sure before I spend the money on them.

Also I've found reproduction Ford Mustang II floor pans...will they swap over to the Bobcat?

Title: Re: Compatability of body panels - Pinto to Bobcat
Post by: DBSS1234 on April 29, 2009, 03:53:26 PM
Rear fender panels are the same, not sure of the Mustang II floors.
Title: Re: Compatability of body panels - Pinto to Bobcat
Post by: popbumper on April 29, 2009, 04:35:06 PM
The MII floorpan incompatibility with the Pinto has been discussed here many times before. Do a search to find out more.

Chris
Title: Re: Compatability of body panels - Pinto to Bobcat
Post by: 75bobcatv6 on April 29, 2009, 05:26:21 PM
the floor pans require a bit of work, other then that everything other then hood/Grille are about the same.
Title: Re: Compatability of body panels - Pinto to Bobcat
Post by: FlyerPinto on April 29, 2009, 05:38:09 PM
Thanks for the info folks. Every time I've tried a search I seem to end up with a mess, so I just asked the question. Sorry.
Text only | Text with Images