Text only | Text with Images

Pinto Car Club of America

Shiny is Good! => Your Project => Topic started by: 72Wagon on February 14, 2009, 09:57:35 AM

Title: Drilling Rotors/Axles for 5 bolt
Post by: 72Wagon on February 14, 2009, 09:57:35 AM
 I have read about people swapping axles and rotors/calipers to convert to 5 lug wheels. I have not read anything about Drilling 4 lug rotors/axles for 5 lug pattern, can this be done by a machine shop. I have a 72 wagon with a mII 8 inch rear axle. I am happy with the braking just want 5 lug aftermarket 14 inch wheels.
Kevin
Title: Re: Drilling Rotors/Axles for 5 bolt
Post by: Carolina Boy on February 14, 2009, 10:33:32 AM
Go to the general Pinto talk forum, 2nd page and check out my post about 4 to 5 lug. The guys really came thru for me and will help you, too!
Title: Re: Drilling Rotors/Axles for 5 bolt
Post by: 72Wagon on February 14, 2009, 10:41:36 AM
 Will do , thanks
Title: Re: Drilling Rotors/Axles for 5 bolt
Post by: dholvrsn on February 14, 2009, 11:08:57 AM
A machine shop with an indexing table or dividing head can do this. Although, it's probably cheeper to buy the rotors and stuff from place like Speedway Motors.
Text only | Text with Images