Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: dholvrsn on January 25, 2009, 01:50:45 PM
I'm putting together an 8" rear for my turbo Pinto. The ring gear has a yellow paint mark across *three* teeth. The pinion has an old paint mark across one tooth, two newer paint marks pointing to two other teeth, and a grinding mark on yet another tooth. So how to I line this all up?
They have to be right or they will whine or self destruct. Take a look at this page. Gives you some basic setup instructions.
http://www.fordmuscle.com/archives/1999/12/lockright/index2.shtml