Pinto Car Club of America

I race a 74 pinto mini stock in Atlanta GA in the newnan GA area .I am looking for someone to help me at the track and the shop i really need a great motor guy ....
I run a 2.0 with a 2.14 trans and a 3.55 gear on a 3/8 of mile track very high banking....any way i also have a trans and two rearends that i cant identify
   first TRANS # ford 80240    77ET7006AA    75ET7A039AB
   first REAREND#   WGF AN9AB 08 67 206B
   second REAREND# RF D12W 4026B
      any help i thank you

first trans; no idea, second; 1977, third; 1975. The 71,72&73's had lower 1st and 2nd. (you are running in 2nd gear, right?)
can't help with the rears, there should be gear ratio numbers near the end of the tag where it is bolted on, if they are 6-3/4, 3.08, 3.40 or 3.55

first rear:

WGF AN9AB 08 67 206B

I believe should be more like:

  WGF  AN 9AB
3.08   67   2068

Which would code out to a 6.75" rear with 3.08 gearing, no trac-loc

for the other, I cannot find the 'RF' prefix code anywhere in Ford codes.  You may be able to find it here:
http://www.hotrodders.com/forum/ford-rearend-axle-tag-id-codes-posted-130274.html (http://www.hotrodders.com/forum/ford-rearend-axle-tag-id-codes-posted-130274.html)
OR, is there the possibility it may not be a Ford rearend?

Good luck! :D