Pinto Car Club of America

Well..., I always mark stuff...,  But, the vacuum lines for the EGR on my '88 Turbo Coupe engine have me lost. Does anyone have a layout (or know of a site dispaying such).

On the '88 there is the toilet tank bowl looking thing with a single vacuum line.  It runs to a splitter and then...???  Associated with that is something else with similar tee-ed vacuum lines and two electric connector on a metal bracket.  These were all located on the passenger side, rear corner on the T/C.  Most of this is still hooked to itself, but the "where does it go from here" is what I need to know.

My assumption is some is EGR, some goes to the black multi port near the master cylinder and I assume one is for the original T/C dash boost gauge.

I know some will say just to dump the EGR and frankly I would, BUT with ever changing smog laws I want it "ready" should the day come when Calif. starts testing older cars again.

Thanks for any input, Tom

Look here....

http://www.rothfam.com/svo/reference/

Thanks for the link.  It looks like the "Toilet tank float thingy"  is only used for the Turbo Coupes Heat - A/C system. So..., that goes! A closer look at the EGR I'm sure will have me sorting it out soon.
Thanks, Tom