Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: dave1987 on October 15, 2008, 03:05:11 AM

Title: Odometer question
Post by: dave1987 on October 15, 2008, 03:05:11 AM
How do you go about changing the reading on an odometer?

I pulled a speedometer from the bobcat I've been parting out at a local yard and I was thinking that I could use it to replace my existing one if it ever fails.

Now if my original one were to fail, how would I go about matching up mileage on the replacement?
Title: Re: Odometer question
Post by: 71HANTO on October 15, 2008, 10:23:24 AM
It is illegal to undo your speedo cable, take off the nylon gear and spin the speedo shaft with a drill. WINK WINK... :police:
Title: Re: Odometer question
Post by: Reed on October 15, 2008, 11:11:12 AM
If you are careful, you should be able to disassemble the odometer unit and just swap the mileage display.
Text only | Text with Images