Print Page - STILL NEED A 71/72 REAR BUMPER

Title: STILL NEED A 71/72 REAR BUMPER
Post by: dick1172762 on August 07, 2004, 02:11:03 PM

Please help me finish my race car! I need a 71/72 Rear bumper without the rubber strip. Bumper guards are ok, just no rubber strip. Thanks, Tricky Dick.

GOT ONE !!!!

Title: Re: STILL NEED A 71/72 REAR BUMPER
Post by: WVBobcat77 on August 07, 2004, 06:42:35 PM

Dick,

If you'll look in the group purchase category, under "bumpers galore", you'll find a list of bumpers that I had picked up for the club. I'm sure there's something in there that you can use. Also, your column is on it's way, UPS didn't pick it up. I finally had to take it to the drop-off center.

Bill in WV

Title: Re: STILL NEED A 71/72 REAR BUMPER
Post by: dick1172762 on August 07, 2004, 10:44:39 PM

Bill!
No problem on the column. I need a rear bumper for a 71/72 with only the holes for the mounting brackets. Should be 2 holes about a foot from each end, big enough for a bumper bolt (1/2"?) If it has a row of little hole its full length, it is made for the rubber strip and I can't use it. The bumper is very small and lite weight. Maby 4 lbs max. Let me know. Thanks, DICK

Title: Re: STILL NEED A 71/72 REAR BUMPER
Post by: WVBobcat77 on August 08, 2004, 11:47:43 AM

Dick,

Sorry, all the 71/72 bumpers we have. have the holes punched to accept trim.

Bill in WV

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => Parts Resources, Here is where you can find this or that. => Topic started by: dick1172762 on August 07, 2004, 02:11:03 PM