I have been looking for a V6 radiator for some time. No body lists them any more. I thought a V8 Mustang II radiator would fit, but they are 4 inches wider. Searching Champion Cooling web site I discovered that the Maverick one listed was within 1/2 dimensions of mine.My old one is a factory 3 core from an A/C car. I ordered a 3 core Maverick one , part number CC329. The inlet and outlet are on the correct sides, but are 1 1/2, the original was 1 1/4. I paid an extra $60, and they put 1 1/4 inlet and outlet for me. it fit near perfectly! I just had to drill two bottom holes for the fan shroud. The other holes lined up with the factory mounting holes. The position of the trans fittings and bottom outlet are slightly different spots, but I connected it with no problems.