PINTO CAR CLUB of AMERICA

Shiny is Good! => General Pinto Talk => Topic started by: lefty on October 23, 2011, 12:09:43 AM

Title: ford c3 transmission lines
Post by: lefty on October 23, 2011, 12:09:43 AM

on the c3 which transmission  line is the flow back from the radiator and where does it go on the transmission itself?? there are 2 places where the lines screw into the transmission ...  thanks in advance...
Lefty

Title: Re: ford c3 transmission lines
Post by: dave1987 on October 23, 2011, 12:41:01 AM

Return line should be on the passenger side and pressure should be on the driver side.

Title: Re: ford c3 transmission lines
Post by: lefty on October 23, 2011, 10:26:30 AM

 return line which inlet on the transmission mission does it screw into   there are two inlets on the transmission -

thanks..

Title: Re: ford c3 transmission lines
Post by: lefty on October 23, 2011, 10:28:23 AM

these two inlets on the """"transmission""" are both on passenger side of transmission I need to know which handles pressure and which handles return...

Title: Re: ford c3 transmission lines
Post by: lefty on October 24, 2011, 12:12:00 AM

I don't have any lines to go by I am making them from scratch....

Title: Re: ford c3 transmission lines
Post by: dave1987 on October 24, 2011, 09:34:24 AM

Heading back to work in a few, but I will check my trans shop manual later and find it for you.

Title: Re: ford c3 transmission lines
Post by: RSM on October 24, 2011, 06:05:41 PM

I could be wrong but I believe the one towards the front of the transmission is the pressure side...If I'm wrong it will be good to know since i have to plumb a cooler into my wagon at some point in time. The transmission out of my drag car had a hard line going from one fitting directly to the other. Now that it will be street driven I'll need a cooler.