PINTO CAR CLUB of AMERICA
Shiny is Good! => General Pinto Talk => Topic started by: lefty on October 23, 2011, 12:09:43 AM
-
on the c3 which transmission line is the flow back from the radiator and where does it go on the transmission itself?? there are 2 places where the lines screw into the transmission ... thanks in advance...
Lefty
-
Return line should be on the passenger side and pressure should be on the driver side.
-
return line which inlet on the transmission mission does it screw into there are two inlets on the transmission -
thanks..
-
these two inlets on the """"transmission""" are both on passenger side of transmission I need to know which handles pressure and which handles return...
-
I don't have any lines to go by I am making them from scratch....
-
Heading back to work in a few, but I will check my trans shop manual later and find it for you.
-
I could be wrong but I believe the one towards the front of the transmission is the pressure side...If I'm wrong it will be good to know since i have to plumb a cooler into my wagon at some point in time. The transmission out of my drag car had a hard line going from one fitting directly to the other. Now that it will be street driven I'll need a cooler.