PINTO CAR CLUB of AMERICA

Shiny is Good! => General Pinto Talk => Topic started by: warhead2 on May 13, 2020, 05:02:40 AM

Title: Caution sharp edges
Post by: warhead2 on May 13, 2020, 05:02:40 AM

While working on my project I was cleaning in the area where lower control arm and spring cup area. Cleaning the dirt I poked my finger with a sharp metal splinter. So anyone
 cleaning/working in this area be careful. You can push it down with a screwdriver.  I circled the splinter there can be more than one. (https://uploads.tapatalk-cdn.com/20200513/e83a59964576b039d7ff9ed00ee032b9.jpg)(https://uploads.tapatalk-cdn.com/20200513/2e660e9476b5972a0ea0849f9b79f722.jpg)

Sent from my SAMSUNG-SM-G930A using Tapatalk

Title: Re: Caution sharp edges
Post by: Reeves1 on May 13, 2020, 07:21:50 AM

Using a sanding disk on my grinder, I did every spot weld I could get at.....