PINTO CAR CLUB of AMERICA

Shiny is Good! => General Pinto Talk => Topic started by: Reeves1 on January 14, 2012, 06:49:44 AM

Title: Bracket picture needed
Post by: Reeves1 on January 14, 2012, 06:49:44 AM

Need a couple pictures of the bracket that holds the throttle cable at the engine on a 1972 Pinto.
Post here if they are big/good, or PM me for my e-mail.

Thanks !

Title: Re: Bracket picture needed
Post by: Fred Morgan on January 14, 2012, 10:24:59 AM

Derrick this is 73 2.0.   Fred   :)

Title: Re: Bracket picture needed
Post by: Reeves1 on January 14, 2012, 10:50:14 AM

Thanks Fred !
I had thought the original may work for my 2x4 set up. It will not.

Local junk yard doesn't have anything older than 10 years old.
I'll keep looking...