PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Fehrion_sit on April 10, 2012, 11:56:26 AM
-
i have cobra rims being offered to me. but i do not think they will remotely fit with my pangra kit in the front or with my 8" rear. i just wanna get some wiser input before i spend money on rims that i cant use.
i would be okay with rolling the rear quarter panels and running fender flares all the way around. but my front is fiberglass, i feel very limited
Rim Info
17x9 with 225mm on the front ... exact tire is 225/40/17
17x10.5 +24 offset and 245 on the rears 245/40/17
Below is the link to a picture of the exact rims
http://i52.photobucket.com/albums/g21/Fehrion_sit/562212_10150911782224899_2002733374_n.jpg
will they fit without god awful modifications?
-
if i was a betting man i would say no. 17x8 cobra rims from a 98 with factory offset, granada spindles and a 7/16 spacer just just make the stock fenders up front. I have the same ones on the back with 275/40's but had to use an explorer diff to make it all fit and it is 59 1/2 flange to flange. things are tight tight tight on both sides of the rear skins
i stuck a picture on reeves front air dam thread if you want to have a look