Author Topic: wheel base stretch (Read 467 times)

376t · « **on:** May 02, 2020, 06:51:06 AM »

I've seen some stretched wheelbase Pintos in photos. How is this being done without a new tube chassis? Should be a couple different methods.

Wittsend · « **Reply #1 on:** May 02, 2020, 11:04:06 AM »

Are you speaking of fiberglass bodied, tube chassis Funny Cars (image 1)? That is the only recollection I recall. Can you post picture of an example?

Now, it might have been that on certain cars the wheel openings were enlarged to accommodate larger tires. And in doing so the enlargement was forward from the rear of the front opening and rearward from the front of the rear opening (illustration - of my limited skills). Possibly that is what is done on Glidden's early Pro Stock Pinto (image 2) But, even doing that I can't imaging getting more than a few inches of increased wheelbase. And in the case of Glidden's Pro Stock Pinto I'm incline to think that the wheelbase was not allowed to be altered. So, maybe it is more of an illusion?

376t · « **Reply #2 on:** May 02, 2020, 12:35:59 PM »

I was looking at an old post the other day on a pro street Pinto and the owner said he moved the front wheels forward 3 inches and used 4 fenders to make 2 fenders , but didn't explain how he increased wheelbase . Wondering if frame was cut and extended or crossmember and related parts were cut out and relocated. Lot of work either way. Maybe someone has grafted on a fox body front frame section. Curious about all these scenarios.

News:

Current Classifieds

Author Topic: wheel base stretch (Read 467 times)

376t

wheel base stretch

Wittsend

Re: wheel base stretch

376t

Re: wheel base stretch