PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: ToniJ1960 on April 06, 2013, 05:22:27 PM

Title: wagon gate rattles
Post by: ToniJ1960 on April 06, 2013, 05:22:27 PM
 Has anyone ever conquered the wagon gate rattles?
Title: Re: wagon gate rattles
Post by: Pinto5.0 on April 07, 2013, 06:23:21 PM
If the hinges are tight & the latch is adjusted then my guess is a new seal would stop any rattle.
Title: Re: wagon gate rattles
Post by: TIGGER on April 08, 2013, 08:09:39 PM
I had a clump of sound deadener come loose in my 79.  I had to remove the latch to get it out.
Title: Re: wagon gate rattles
Post by: ToniJ1960 on April 09, 2013, 03:58:21 PM
 Well the catch part for the latch in towards t he front of the car as far as it can go, but I can grab the rear gate and pull on it and I hear that clunk. Is there supposed to be some kind of rubber bumper that pushes against it outwards? That mounts on the body where the door closes?
Title: Re: wagon gate rattles
Post by: Pinto5.0 on April 09, 2013, 05:22:51 PM
Open it about a foot & grab the bottom of the hatch & skake it to see if the rattle is inside it.
Title: Re: wagon gate rattles
Post by: ToniJ1960 on April 09, 2013, 07:10:45 PM
 Its comming from the latch itself Im sure
Title: Re: wagon gate rattles
Post by: Pinto5.0 on April 09, 2013, 08:12:19 PM
Its comming from the latch itself Im sure

I'm pretty sure the latch has a double catch just like doors do so maybe the second catch is broken
Title: Re: wagon gate rattles
Post by: ToniJ1960 on April 09, 2013, 11:56:27 PM
 Does the stationary part of the latch assembly normally have plastic on it like the door post does?
Title: Re: wagon gate rattles
Post by: Pinto5.0 on April 10, 2013, 02:20:05 PM
Does the stationary part of the latch assembly normally have plastic on it like the door post does?
\\
 
I don't think I ever saw any that aren't just steel without plastic.
Title: Re: wagon gate rattles
Post by: Wittsend on April 10, 2013, 08:45:05 PM
My '73 wagon has the locking latch and a secondary spring steel "tongue" that applies tension when shut. See the picture. The tongue is in the foreground.
Tom