PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: chrisa850 on June 21, 2014, 08:46:25 PM

Title: V6 bypass hose inlet
Post by: chrisa850 on June 21, 2014, 08:46:25 PM

Does anyone have a source or part number for the 2800cc V6 bypass hose lower rear water inlet? It's the component labeled 8592 in the attached drawing. It doesn't seem to follow the standard D4/D5/D6FZ-8592xx part number.

Title: Re: V6 bypass hose inlet
Post by: bbobcat75 on June 22, 2014, 12:57:16 PM

I don't have a part number took it to a local parts store and just matched up a similar hose. Not a huge help but a thought! If you don't have the hose then hmmm hopefully some one else can shed some light here!

Title: Re: V6 bypass hose inlet
Post by: enzo on June 22, 2014, 01:01:00 PM

Napa part #7633.

Title: Re: V6 bypass hose inlet
Post by: chrisa850 on June 22, 2014, 02:46:07 PM

I have the bypass hose. The part I'm looking for is the aluminum inlet itself. part 8592 in the pictorial.

Title: Re: V6 bypass hose inlet
Post by: bbobcat75 on June 22, 2014, 09:18:11 PM

your looking for the thermostat housing! good luck being alum. and a 2.8 part only will be a hard part to find that is good and not rotted out!! good luck - check the bay!! ebay

Title: Re: V6 bypass hose inlet
Post by: enzo on June 23, 2014, 05:01:07 PM

Sorry, I didn't read the post completely.  I have one that is usable if you can get the broken bolt end out of it.
Looks like the is enough material to carefully drill out the bolt and re-thread.