Current Classifieds

Looking for a Single Stage Nitrous Kit/ 2-bbl Holley Spray Bar Plate
Date: 01/06/2017 11:42 pm
1980 cruising wagon ralley

Date: 07/12/2019 01:41 pm
74 Wagon Interior
Date: 01/22/2017 06:38 pm
parting out 1975 & 80 pintos
Date: 04/28/2018 04:12 pm
1972 Rallye wagon rebuild
Date: 11/14/2020 07:31 pm
Looking for a 1977 Ford Pinto Runabout Hatchback
Date: 04/27/2018 10:28 pm
Wanted 1971-73 pinto 2.0 4 speed manual transmission
Date: 03/06/2019 06:40 pm
Trailer Hitch - 73 Pinto Wagon
Date: 02/04/2018 08:26 am
NEED 77/78 MUSTANG II Left Motor Mount
Date: 04/15/2017 05:14 pm
2.8 Engine mount brackets
Date: 12/28/2016 11:42 am
Wanted Postal Pinto
Date: 09/26/2019 05:31 pm
74 Driver side Wagon Fender, 74 driver side Door, Nice Wheels

Date: 09/15/2019 08:30 pm

« previous next »
Pages: [1]   Go Down

Author Topic: New Carb  (Read 1021 times)

0 Members and 1 Guest are viewing this topic.

Offline danidanko

  • Pinto Driver
  • *
  • Posts: 1
  • FeedBack: +0/-0
  • Another Pinto Driver

    • Total Badges: 1
    Badges: (View All)
    Topic Starter
New Carb
« on: June 08, 2018, 05:44:59 PM »
Hello, please see attached file, I got a 74 pinto and the carb is in pieces and I don't know where what goes when I put in a new carb, please help

In the picture have numbers and arrows, my questions are:

1) fuel inlet
2) decel port - what does it do where do I connect it to?
3) what is this inlet what does it do?
4 & 5)  what components do these coolant lines connect to?
6) where do I connect this (choke heater?, just 12v and returns via engine ground?)
Logged

Offline nnn0wqk

  • Pinto Member
  • **
  • Posts: 99
  • FeedBack: +24/-0
  • Gender: Male
  • Another Pinto Driver

    • Total Badges: 5
    Badges: (View All)
    Topic Starter Poll Voter Windows User Tenth year Anniversary Fifth year Anniversary
Re: New Carb
« Reply #1 on: June 17, 2018, 10:23:13 AM »
Your number 1 goes down to the fuel pump. Should be a steel line between carb and pump with hoses on each end with filter screwing into carb.
Your number 2 I believe is the distributor advance line. I am not aware of a decel port used on 74 2.3l engine
I believe your number 3 is the line going over to the EGR system amplifier.
The choke water lines one connects to the steel line running along side the valve cover. The other to the fitting below carb in the intake manifold end.
The electric choke connects to a lead coming off the alternator. It is actually an AC voltage if I remember correctly. Comes off a stator tap.


Hopefully the pictures will help you out. These are off a 74 2.3l California emissions engine. Calibration number is C411R1
Logged
Pages: [1]   Go Up
« previous next »