PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: bbobcat75 on March 17, 2014, 11:11:26 AM

Title: TRANSMISSION CROSS MEMBER
Post by: bbobcat75 on March 17, 2014, 11:11:26 AM

IS THERE A DIFFERNCE IN A AUTO TO MANUAL TRANS CROSS MEMBER??


THANKS

Title: Re: TRANSMISSION CROSS MEMBER
Post by: Wittsend on March 17, 2014, 01:02:01 PM

Well..., probably not applicable but "No," - if your going from a C-4 to a T-5 (in a '73). You simply reverse the crossmember and slot a few holes.  I even reused the old mount from the C-4 onto the T-5.  And I'm not even sure if the hole slotting was necessary.  I might have only done that "just in case."

Title: Re: TRANSMISSION CROSS MEMBER
Post by: amc49 on March 18, 2014, 06:36:00 AM

On '80 I changed mount only going from standard 4 speed to ATX. Crossmember stayed the same.