PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Scott Hamilton on October 26, 2014, 04:37:44 PM

Title: SPEEDOMETER GEAR 18 tooth- Stock 2000cc 4Spd
Post by: Scott Hamilton on October 26, 2014, 04:37:44 PM

Question,

I have a presumable stock 2000cc 4speed but I put 14" wheels which made the speedometer incorrect. I just removed the cable and gear, (replacing finally) and counted 18 Teeth. What tooth number do I need to try? Do I go to the 19-20 or the 17 tooth gear?

If I remember correctly, she was 5MPH over what I was actually going- you gotta love today's technology and GPS...

Title: Re: SPEEDOMETER GEAR 18 tooth- Stock 2000cc 4Spd
Post by: amc49 on October 26, 2014, 08:32:21 PM

If speedo shows 40 and you were actually going 35 then 19+, you want to add teeth to the final DRIVEN gear to slow speedo down a bit.

Title: Re: SPEEDOMETER GEAR 18 tooth- Stock 2000cc 4Spd
Post by: Scott Hamilton on October 26, 2014, 09:23:10 PM

Cool... I'll buy a few and give it a shot,

Thanks,