PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Runabout75 on September 11, 2013, 09:04:02 PM

Title: Replacing the seal on a sunroof
Post by: Runabout75 on September 11, 2013, 09:04:02 PM

My Pinto has a factory sunroof that leaks. I've cleaned the drains but still water comes in. Where can I get the proper rubber seal to replace the 40 year old one in place now? Any special instructions for doing this job?

Title: Re: Replacing the seal on a sunroof
Post by: TIGGER on September 16, 2013, 08:00:36 PM

Do you have a crank back or the popout moon roof?  I am guessing crank back due if you are referring to your 75 in your signature.

Title: Re: Replacing the seal on a sunroof
Post by: 289Wagon on September 17, 2013, 12:11:36 PM

 Since you didn't say what year or what type of roof you have I'll post what I have found.
 The part w/red is available (1) for a built before 10/1/76 w/o vinyl roof. (68" long)
 The green is available (listed as rear rubber w/o steel insert, 33" long)

Title: Re: Replacing the seal on a sunroof
Post by: Henrius on September 30, 2013, 08:54:22 PM

Quote from: Ricpinto on September 17, 2013, 12:11:36 PM

Since you didn't say what year or what type of roof you have I'll post what I have found.
 The part w/red is available (1) for a built before 10/1/76 w/o vinyl roof. (68" long)
 The green is available (listed as rear rubber w/o steel insert, 33" long)

Where on earth did you find that diagram??? Not in the factory service manuals!! That is exactly the sunroof my 1973 has. Where can I get these parts, especially the seal market #1??

Title: Re: Replacing the seal on a sunroof
Post by: 289Wagon on October 01, 2013, 09:29:11 AM

 I sent you a PM about those parts.