PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Runabout75 on September 11, 2013, 09:04:02 PM
-
My Pinto has a factory sunroof that leaks. I've cleaned the drains but still water comes in. Where can I get the proper rubber seal to replace the 40 year old one in place now? Any special instructions for doing this job?
-
Do you have a crank back or the popout moon roof? I am guessing crank back due if you are referring to your 75 in your signature.
-
Since you didn't say what year or what type of roof you have I'll post what I have found.
The part w/red is available (1) for a built before 10/1/76 w/o vinyl roof. (68" long)
The green is available (listed as rear rubber w/o steel insert, 33" long)
-
Since you didn't say what year or what type of roof you have I'll post what I have found.
The part w/red is available (1) for a built before 10/1/76 w/o vinyl roof. (68" long)
The green is available (listed as rear rubber w/o steel insert, 33" long)
Where on earth did you find that diagram??? Not in the factory service manuals!! That is exactly the sunroof my 1973 has. Where can I get these parts, especially the seal market #1??
-
I sent you a PM about those parts.