PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: cj3b on February 06, 2017, 04:55:08 AM
-
Hi all
i have some problems with my rear windschield heater who will not work. When i look at the fuses, every fuse is ok, and i got 12V on every fuse. When i activate the heater-switch you will hear a "click" of the relays, but nothing happens. Where is the heater-relais mounted and have someone an idea whats the problem could be?
ps (i got also no power on the horn button - and all fuse are ok.....)
sorry for my bad english, i hope you will understand what i mean...lol
thank you and regards
Dan
-
I believe the relay is behind the dash above the glove box door? Does the indicator light stay on when you activate the switch? If it does you might want to see if you have any voltage at the wires on the heated glass.
-
Hi Tigger
no the indicator ligth do not ligth and on the conectors of heater i have no voltage ( no matter how the Switch is set ) - i will check the Position of the Relais (i hope i will find them ... lol).
thank you
Dan
-
You might have to check the fusable link , they are a wire connector end that serves as a fuse and a terminal end , it's bolted to the starter solonide post , see if its burned or not hooked up , you will see it go through the firewall by the heater hoses ,