PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: pgccp on February 12, 2015, 07:02:36 PM
-
What is everyone using for a rear diff for the v8 swap in their pinto
What is the best newer vehicle to use as a donor to fit under a 1977 Pinto
Will a Ranger 8.8 work? or a Explorer 8.8? Or something else>
Want to say Thanks to everyone that has help me with info and parts.
Thanks Bob
-
What HP / TQ you plan on ?
Wife had two 07 Rangers. First an auto. Second std. Both had 4:88 gears.
If you go with a 4 speed auto , not a big deal: but will be snappy as heck from take off ! ;D
-
rangers/explorers from the 90's had a lot of 3.73 geared 8.8s.
-
Try and find an older junk yard in your area. Find out if they have any late 50's Fords out back and look for a '57-'59 rear end. It should be a 9" rear end, and it will fit right on the spring pads. But you will have to have new U bolts and redrill the stock shock mounts.
-
my 79 has the first year 9" from a 1957 ranchero, or such. it does fit without cutting the housing or axles...