PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Dalimoman on February 29, 2024, 10:07:56 PM
-
I'm in Napa, CA and I have a 1978 Runabout. 2.3, 4 speed California car. It has the 6500 Feedback carburetor. A few months ago I had an engine compartment fire. No major damage but there are a number of very small vacuum lines that were melted. I need a source for these small vacuum lines, and I need to figure out where they all connect. Some are color coded but still the connections are a mystery. I would love to find someone locally who is familiar with these systems and could take care of the repairs correctly. It does run and is driveable so I could deliver it to a local shop. Any help is appreciated. This has been my baby for 14 years and I would love to get it back to where it should be. Thanks in advance......R ick
-
I owned a 78 Cal-emissions HB about 13-14 years ago. It still had all the emissions stuff installed, an 89K little old lady car. Unfortunately I do not have any detailed pictures of the engine and vacuum lines. I did create a detailed thread on my dad's 79 wagon with the vacuum line routing. It is a 4cyl 4spd, non cal-emissions car though. Even though it is different, maybe the thread will be helpful? Good luck to you.
Vacuum Connections for a 79 4cyl. (fordpinto.com) (https://www.fordpinto.com/general-help/vacuum-connections-for-a-79-4cyl/msg52925/#msg52925)