PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: D1 on October 07, 2012, 06:59:14 PM
-
all of my trim is oxidized. any ideas on the safest,quickest,easiest way to cleam it so I can get a coat of wax on it.
thanks
-
If you are referring to your 80, this trim was anodized from the factory. It is going to be hard to clean up and make look new without getting them reanodized. A buffing wheel with some polish will help some but as I said before, they will never look new unfortunately.
-
WOW!!!!! It looks like dried water spots..... the luggage rack system is cleanning up with never dul...the window and body trim is what I am having trouble with.
-
Mother's polish (but not too vigorous) then clean, mask, and clear coat the trim with semi-gloss rattle-can. That is about as good as you'll get. You can test what it will approximately look like by rubbing a little water on the trim first and looking before it dries.
71HANTO