PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: little76er on June 19, 2020, 10:30:06 AM

Title: oil and water pressure switch location
Post by: little76er on June 19, 2020, 10:30:06 AM

Just had my new rebuilt engine installed in my 76 wagon. I'm doing the finishing work on it and can't find any info on the correct location of the oil/water sending units. My problem is I have a location at the bottom of the block and one at the top of the block, but I also have a threaded hole at the back of the cylinder head on the intake side? any help would be thankful.

Title: Re: oil and water pressure switch location
Post by: HOSS429 on June 19, 2020, 12:37:02 PM

which engine do you have ?

Title: Re: oil and water pressure switch location
Post by: little76er on June 19, 2020, 02:28:13 PM

the 2.3L

Title: Re: oil and water pressure switch location
Post by: pinto_one on June 22, 2020, 07:39:22 AM

at the top of the head is the oil pressure , at the bottom of block it the water temp

Title: Re: oil and water pressure switch location
Post by: pmfman on July 08, 2020, 05:15:26 PM

What he said above, if it helps they are also on the drivers side