Current Classifieds

2.3 turbo intake (lower)

Date: 07/15/2020 09:29 pm
1975 Pinto bumpers
Date: 10/24/2019 01:45 pm
1974 Pinto Passenger side door glass and door parts

Date: 02/18/2017 05:55 pm
Wanted - Offenhauser intake for 2.8l (6097DP)
Date: 01/28/2019 05:15 pm
72 pinto drag car

Date: 07/08/2017 08:25 pm
72 pinto wagon. 1 owner. 67K miles
Date: 10/14/2019 08:24 pm
Pinto 4-spd transmissions
Date: 06/15/2018 09:15 am
1978 need kick panels and rear hatch struts and upper and lower mounts
Date: 11/29/2018 10:26 am
Bumper, grill and fender wanted
Date: 12/24/2016 04:13 pm
Steering Wheel Needed for 1972 Pinto
Date: 08/08/2018 12:26 pm
Rear Bumper
Date: 07/26/2021 01:08 pm
71-71 speedo cable
Date: 07/31/2021 09:04 pm

Author Topic: Need help with timing sprocket  (Read 1238 times)

0 Members and 1 Guest are viewing this topic.

Offline dave1987

  • Pinto Sr. Master
  • ******
  • Posts: 3431
  • FeedBack: +25/-0
  • Gender: Male

  • Total Badges: 11
    Badges: (View All)
    Topic Starter Signature Tenth year Anniversary Poll Voter Mobile User Apple User Linux User Windows User 1000 Posts Fifth year Anniversary Photographer
Need help with timing sprocket
« on: March 01, 2012, 08:57:40 PM »
I am disassembling the motor on the '73, it's a 2.0.

I have everything off the block except for the crankshaft timing sprocket, which is stuck to the crankshaft! I tried using heat, rust penetrator (PB Blaster, and prying on it carefully from the back with a flat blade screwdriver. I even bought two 3/8" grade 8 bolts, ground the heads down half way and the shaft at the head end half way in to get  behind the sprocket, then using a bolt puller to pull it off, but the bolt heads broke!

The last things I can think of to do is to drill and tap two holes in the face of the sprocket and use the bolt puller to pull the sprocket off the shaft, or to split it off the shaft and destroying i, but I really don't want to for the following reason..


Will drilling and taping two holes in the face of the sprocket affect the balance of anything? If I have to split it, will a 2.3L sprocket fit or are they different? I have a spare 2.3L sprocket, but not a 2.0L one.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

RSM

  • Guest
Re: Need help with timing sprocket
« Reply #1 on: March 02, 2012, 08:43:46 AM »
How much heat did you use? Sometimes it take a ton of heat before those will come off. You might plan on replacing it if its that stuck.

Offline 72pair

  • Pinto Sr. Member
  • ****
  • Posts: 269
  • FeedBack: +56/-0
  • Gender: Male

  • Total Badges: 6
    Badges: (View All)
    Tenth year Anniversary Topic Starter Signature Poll Voter Windows User Fifth year Anniversary
Re: Need help with timing sprocket
« Reply #2 on: March 02, 2012, 03:53:11 PM »
I'm with RSM, you may need more heat. Also try cleaning/dousing with brake clean first then airing. Old oil and heat make a sticky varnish. The crank will come out of the block with the cover still on if needed. Seems like I drove a gear off with a bent punch behind the seal one time. Good luck and let us Know what works! JT
72 sedan 2.0, c-4 beater now hot 2.0, 4-speed
72 sedan 2.3, t-5, 8" running project
80 Bobcat hatchback 2.3, 4-spd, 97K