as many of you all know i have a 73 wagon with a 2.0 and 6.75 rear end.

i have a chance to pick up an 8" from a mii.

my question is whether the rear end yoke on the 8" is the same as the yoke on the 6.75 and will the drive shaft and u joint from my 73 fit.


i recently replaced my original rear end with a later  model 6.75 from a later model pinto with the oval spring mount pads and everything fit ok

i wanted to make sure that the drive shaft and u joint would fit before i bought the 8".

thanks..