PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: mrpinto73 on July 11, 2012, 11:25:11 AM
-
i put a new cap and gasket on master cylinder still have leak any help
-
sounds like u need to replace the entire thing if it is stil leaking
-
You might try 2 gaskets cut out the center just use the thicker flat part of the gasket, makes a tight fit.
-
That bail wire should take some serious pressure to snap over the cap. If it's not a tight fit try bending it to make it tight.