PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: James Meter on February 25, 2013, 10:23:48 PM
-
I'm looking into getting a new cam for my soon-to-be daily driver. I've looked into a Lunati cam with 410 for the lift, with 231 in duration..can't read the rest of my notes from there.. Any advice on the part? I'd like a little bit of an attitude from it..but also decent mileage too!
-Thanks!
-
That's a mild cam and a nice upgrade for a stock or near stock engine. Factory lift is .399 so it's not a big jump from stock. Make sure to replace the rockers, might also want to replace the lifters and timing belt while you're there. And if you go the final step and degree the cam you'll be surprised at how much power it will gain. (BTW, I'm guessing this is a 2.3?)