Current Classifieds

Front Body parts needed
Date: 02/09/2018 06:09 pm
77 Wagon rear hatch
Date: 12/04/2019 05:57 am
Leaf Spring Mount Rubber Insulator
Date: 08/05/2018 01:58 pm
v8 springs
Date: 05/07/2017 04:46 pm
1977 Pinto for parts

Date: 10/10/2018 06:25 pm
1977 Pinto Cruizin Wagon

Date: 04/11/2024 04:13 pm
SEARCHING HOPELESSLY
Date: 02/02/2017 07:21 am
Looking for license plate bracket, interior parts 72' Runabout
Date: 04/12/2017 08:15 am
Wanted instrument cluster lens for 74
Date: 04/30/2023 04:31 pm
pinto wagon parts
Date: 12/19/2019 01:43 pm
Parts for 74 Squire Wagon
Date: 09/16/2019 07:35 pm
Parting out 77 Bobcat Hatch
Date: 11/06/2017 04:16 pm

« previous next »
Pages: [1]   Go Down

Author Topic: How do you repair a frame that's rusted....missing  (Read 754 times)

0 Members and 1 Guest are viewing this topic.

Offline xonknor

  • Pinto Driver
  • *
  • Posts: 6
  • FeedBack: +2/-0
  • Another Pinto Driver

    • Total Badges: 2
    Badges: (View All)
    Topic Starter Mobile User
How do you repair a frame that's rusted....missing
« on: May 07, 2018, 08:38:52 PM »
I just bought a '79 Pinto and after inspection noticed that the frame was pretty much gone on the passengers side. Rusted out totally. Can one repair this by welding new material in? Or can you buy a new frame rail?
Thanks xonknor
Logged

Offline DBSS1234

  • Pinto Full Member
  • ***
  • Posts: 247
  • FeedBack: +29/-0
  • Gender: Male
  • Original owner 77 CW

    • Total Badges: 6
    Badges: (View All)
    Tenth year Anniversary Mobile User Topic Starter Poll Voter Windows User Fifth year Anniversary
Re: How do you repair a frame that's rusted....missing
« Reply #1 on: May 08, 2018, 10:29:50 AM »
Having restored several very rusty vintage Mustangs over the years I can say, yes it can be fixed BUT. You need to make sure the new part is welded to good metal and has good welds securing it. You will need to have repair panels made by a local sheet metal shop of fab them yourself since Pinto repair panels are not available (you can also use rust free used panels if you can find some). If you have the panels made or you make them yourself use metal the same thickness or a little thicker than stock, do not go lighter we are talking frame here! Any areas where you butt weld be sure to include a "backing plate" behind the weld. Also take as many measurements as you can before you cut out the rusted metal and use these measurements to locate the new metal. Not fun but doable.  ;)
Logged

Offline Wittsend

  • Pinto Master
  • *****
  • Posts: 2499
  • FeedBack: +241/-0

    • Total Badges: 8
    Badges: (View All)
    Tenth year Anniversary Mobile User Topic Starter Poll Voter 1000 Posts Linux User Windows User Fifth year Anniversary
Re: How do you repair a frame that's rusted....missing
« Reply #2 on: May 08, 2018, 11:24:36 AM »
I made my own floor raplacement panel but thankfully I didn't have to replace the rail too.  If after you have removed the rail you can flatten it (may require cutting on formed corners) you can make a template on cardboard. You may be forced to only make something "similar" but I'd think if you follow the general principles you should be OK. As with all mods, "Do at your own risk."


Below is an image of the replacement panel. I put dimples in to strengthen the flat metal. I simply used a larger socket on the bottom and a smaller one up top. If you notice some are missing. Ahh..., yea, when it all slips, you smash your finger..., you say "enough is enough." None of it is pretty, but it is all under carpet. The two parallel rows are where the floor was plug welded to the frame rail.
Logged
Pages: [1]   Go Up
« previous next »