Current Classifieds

1979 PINTO PARTS--FREE
Date: 09/13/2022 02:05 pm
WANTED Hood Prop Rod
Date: 01/17/2017 02:47 pm
Wanted Type 9 5spd Transmission
Date: 07/04/2017 03:26 pm
Clutch Cable Needed
Date: 04/03/2017 10:54 pm
Pinto wagon Parts
Date: 06/23/2021 03:25 pm
Pangra wanted
Date: 02/05/2017 01:58 pm
Front Body parts needed
Date: 02/09/2018 06:09 pm
2 liter blocks and heads
Date: 03/28/2018 09:58 am
Early 2.0 engines
Date: 05/09/2018 12:45 pm
2.3 pinto carb
Date: 08/18/2018 02:07 pm
EARLY PINTO CLUTCH PEDAL ASSEMBLY
Date: 02/14/2019 06:27 pm
instrument cluster,4sd trans crossmember,2.3 intake
Date: 08/26/2018 06:23 pm

« previous next »
Pages: [1]   Go Down

Author Topic: PS pump question  (Read 1161 times)

0 Members and 1 Guest are viewing this topic.

boughtabobcat

  • Guest
PS pump question
« on: December 19, 2013, 11:14:04 AM »
Okay, have a question for all those more knowledgeable than me (pretty much everyone!-Lol!) The ps pump on my 1978 Bobcat 2dr. base wagon went out- 2.3l , btw - and I was looking on ebay for a replacement. the original pump when removed was marked HBC X on the reservoir, but I was curious as to whether or not one marked HBC V would work? any help is appreciated.
Logged

Offline amc49

  • PCCA VIP
  • Pinto Master
  • ***
  • Posts: 1256
  • FeedBack: +242/-1
  • Another Pinto Driver

    • Total Badges: 4
    Badges: (View All)
    Topic Starter Poll Voter Windows User 1000 Posts
Re: PS pump question
« Reply #1 on: December 20, 2013, 07:57:17 AM »
If fittings and pump mounts and general configuration match run it............ .............. ..
Logged

boughtabobcat

  • Guest
Re: PS pump question
« Reply #2 on: December 26, 2013, 07:09:57 PM »
Well, it turns out that not only did the pump lock up on me, when I pulled the pulley off to put on a new pump, evidently somehow the inside of the pulley itself is so worn, it won't press onto any other pump- tried a new(remanufactured) pump from NAPA, and you gcan slide the pulley off and on by hand, and even found an older used C11 pump with the same tag (HBC X) and the same thing- looks like no p/s till I find another 2 groove pulley... :(
 
Logged
Pages: [1]   Go Up
« previous next »