PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: sedandelivery on April 07, 2012, 08:47:09 AM
-
What have you been using for the heater hoses going from the heater assy to the engine, I can't seem to find a source for them. Thanks! The parts people have no idea. Do Mustang II have the same?
-
bulk stuff from the local auto parts store works fine. Optionally you can go with the blue silicone high miler if you want it blingy...
-
i got mine from napa! paid by the foot.
-
Many thanks, I thought they had to be the molded ones, now I can continue my job putting the car back together. I am getting tons of work done on the car so far this year!
-
On my 78 I use bulk hose by the foot, for my 73, it had A/C so one of the hoses has two 90 degree bends in it.
For that hose I just bought a pre-molded heater hose of the correct diameter, with the bends that I needed (no specific car, just browsed through what they had behind the counter on the wall). I then cut out the section I needed and away I was! It was about $10 more than what i would have paid for bulk, but for the way it all hooks up, it was necessary.