PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: richcon76 on December 18, 2012, 10:02:34 PM

Title: I have a D-port intake question.
Post by: richcon76 on December 18, 2012, 10:02:34 PM
I am running a D-port head and was woundering which intake would be better to run? One intake that I have is the early D-port (the one that a two barrel bolts to) and the other one I have is the EFI intake. I will be running a 350cfm Holley and want to know what flows better.
Title: Re: I have a D-port intake question.
Post by: dick1172762 on December 19, 2012, 01:52:44 AM
If the carb will clear your hood, the EFI is MUCH better. Much better!!!!
Title: Re: I have a D-port intake question.
Post by: racer99 on December 19, 2012, 06:34:41 AM
The 4 square EFI lower and an adapter works good.
I use the same intake, knife-edged with a 1 inch 4bbl spacer
tigged to it.
Title: Re: I have a D-port intake question.
Post by: richcon76 on December 19, 2012, 09:24:20 AM
Thanks racer99 and dick1172762! I thought the efi was better, but wanted to find out. I will just put the early D-port on the shelf.

Thanks, again