PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: kartracer28 on October 27, 2014, 12:15:11 PM

Title: Holly 2300 series 2 bbl carb. on a 74 pinto 2000cc
Post by: kartracer28 on October 27, 2014, 12:15:11 PM
 I would like to put a "better" carb on my  74 Pinto. will the Holley 2300 series 350 CFM 2BBL  be a good replacement carb. The motor is stock except for an Eslinger  header and 2  1/2" exhaust and Pertronix ignition. Will I need a  "adapter plate" for the carb?
Title: Re: Holly 2300 series 2 bbl carb. on a 74 pinto 2000cc
Post by: amc49 on October 27, 2014, 02:20:53 PM
Yes and yes. The stock power valve circuit will feed too much fuel, it needs to be restricted down to like .020" holes each side.

FYI, old American Motors 2 bbl. carb adapters that used to be part of every 2 bbl. manifold make good adapters, the smaller inside hole pattern fits the small pattern on the 2.0 manifold.

Sure you got a 2.0? '74 came with 2.3........... .....
Title: Re: Holly 2300 series 2 bbl carb. on a 74 pinto 2000cc
Post by: kartracer28 on October 27, 2014, 02:32:14 PM
Yes 100% sure its a 2.0 its one of the "early" 74's I wish it was the 2.3.