PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: ccrain on November 20, 2012, 05:05:44 PM

Title: Help!!
Post by: ccrain on November 20, 2012, 05:05:44 PM

Tommrow I am going to pull the pinto to my workshop but I have not keys and the steering wheel is locked.

Title: Re: Help!!
Post by: johnbigman2011 on November 20, 2012, 05:08:15 PM

Are you stealing it!!! :o

Nah..... Ask Fred Morgan, he could give you some advice on that problem.. I'm sure

Title: Re: Help!!
Post by: cabecho on November 20, 2012, 05:18:55 PM

you could use a drill and a half inch drill bit. that will do the job.  ;D
dont get mad i was just kidding.

Title: Re: Help!!
Post by: Fred Morgan on November 20, 2012, 06:48:10 PM

Pull steering wheel off remove block next to lock pin with phillips screw driver add a small hardware nut on top of pin replace lock block install wheel you are now ready to rock !    Fred   ;D

Title: Re: Help!!
Post by: johnbigman2011 on November 20, 2012, 07:38:43 PM

Told you... Fred knows them Pintos, inside and out!

Title: Re: Help!!
Post by: ccrain on December 02, 2012, 08:25:50 PM

Guys i have gotten side tracked from working on pinto.  In my way of moving the pinto is a old 60s camper that has a tire that will not hold air.  When the tires are flat the leaf springs are on the ground so its impossible to move, it strained are ford 4000 tractor trying to pull it.  So I bought a bottle jack yesterday (6 ton) , so i plan on putting another tire/ rim on it and moving it.

Title: Re: Help!!
Post by: johnbigman2011 on December 02, 2012, 08:36:03 PM

Don't let an old camper stand in the way of building a Pinto!!!