Current Classifieds

1978 PINTO PONY FOR SALE 17,000 ORIGINAL MILES !!!!!!!
Date: 10/10/2019 10:02 pm
Need Mustang II Manual Transmission Mount
Date: 04/21/2017 02:03 pm
Need 76' coupe rear Glass and Front Grille
Date: 07/20/2017 01:23 am
Wanted 1973 Ford right fender
Date: 06/03/2017 08:50 pm
1974 Pinto Door Handles

Date: 03/07/2017 04:06 pm
Esslinger 2.0 intake
Date: 03/06/2017 11:58 am
Need Clutch & Brake Pedal
Date: 12/23/2016 06:16 pm
72 Pinto
Date: 03/07/2019 12:07 pm
hubcaps

Date: 10/31/2018 12:04 pm
Bumper, grill and fender wanted
Date: 12/24/2016 04:13 pm
Tire needed p185/80r13
Date: 12/31/2017 09:08 pm
1974 points distributor for 2.3l
Date: 07/04/2022 07:55 pm

Author Topic: Exhaust manifold egr port  (Read 448 times)

0 Members and 1 Guest are viewing this topic.

Offline Nudemaple

  • Pinto Member
  • **
  • Posts: 16
  • FeedBack: +0/-0
  • Gender: Male
  • Another Pinto Driver

  • Total Badges: 1
    Badges: (View All)
    Topic Starter
Exhaust manifold egr port
« on: February 27, 2020, 11:34:53 PM »
Finally decided to remove the heat shield covering the 2.3L exhaust manifold and saw what I was suspecting for a few years. A cracked manifold. Removed the manifold, EGR tube and downpipe and removed the crumbling manifold gasket. I was able to find an exhaust manifold via Facebook however the egr port and air diverter ports are plugged. Since I'm in California I have to unplug both ports to reconnect everything. The EGR tube is in tact and in good condition. I was able to remove the EGR port plug and I need opinions on which fitting will fit in there?  The fitting appears to be a 90 degree 1/2" NPT Female x 1/2" NPT Male like this one? Correct? Will the rotating male nut at the end of the EGR tube thread correctly into the female of this fitting? Or any other suggestions? Thank you.....

    https://www.amazon.com/Weatherhead-3400X8-Fitting-Degree-Female/dp/B00BKFD0X8/ref=sr_1_14?keywords=street+elbow+1%2F2+inch&qid=1582863566&refinements=p_76%3A1249158011%2Cp_85%3A2470955011%2Cp_n_feature_four_browse-bin%3A3052062011&rnid=3052033011&rps=1&s=industrial&sr=1-14