Current Classifieds

LOOKING for INTERIOR PARTS, MIRRORS & A HOOD LATCH
Date: 04/06/2017 12:13 am
73 actuator for heater blend door
Date: 09/19/2019 04:43 pm
Pinto drive train

Date: 06/29/2018 08:32 am
Pangra wanted
Date: 02/05/2017 01:58 pm
INTERIOR DELUX ARM RESTS - 2 PAIR

Date: 03/23/2018 09:23 pm
77 Caliper Bolt
Date: 08/21/2018 04:02 pm
Looking for Pinto manual shifter parts
Date: 01/28/2021 03:49 pm
hubcaps

Date: 06/05/2018 09:13 pm
72 Pinto
Date: 03/07/2019 12:07 pm
72 pinto drag car

Date: 06/22/2017 07:19 am
1980 cruising wagon ralley

Date: 07/12/2019 01:41 pm
Crane Cam
Date: 02/26/2018 07:50 am

Author Topic: Exhaust manifold egr port  (Read 454 times)

0 Members and 1 Guest are viewing this topic.

Offline Nudemaple

  • Pinto Member
  • **
  • Posts: 16
  • FeedBack: +0/-0
  • Gender: Male
  • Another Pinto Driver

  • Total Badges: 1
    Badges: (View All)
    Topic Starter
Exhaust manifold egr port
« on: February 27, 2020, 11:34:53 PM »
Finally decided to remove the heat shield covering the 2.3L exhaust manifold and saw what I was suspecting for a few years. A cracked manifold. Removed the manifold, EGR tube and downpipe and removed the crumbling manifold gasket. I was able to find an exhaust manifold via Facebook however the egr port and air diverter ports are plugged. Since I'm in California I have to unplug both ports to reconnect everything. The EGR tube is in tact and in good condition. I was able to remove the EGR port plug and I need opinions on which fitting will fit in there?  The fitting appears to be a 90 degree 1/2" NPT Female x 1/2" NPT Male like this one? Correct? Will the rotating male nut at the end of the EGR tube thread correctly into the female of this fitting? Or any other suggestions? Thank you.....

    https://www.amazon.com/Weatherhead-3400X8-Fitting-Degree-Female/dp/B00BKFD0X8/ref=sr_1_14?keywords=street+elbow+1%2F2+inch&qid=1582863566&refinements=p_76%3A1249158011%2Cp_85%3A2470955011%2Cp_n_feature_four_browse-bin%3A3052062011&rnid=3052033011&rps=1&s=industrial&sr=1-14