Use duck tape to hold the headliner, and shave fur where you apply the tape. Use hot glue for the dingle balls.
What? No furry headliner?
They are pretty typical. If you are using the original rods, bend them back out a little, so that they sit in the holes with some outward tension. Be sure to scrape and clean the areas along the edge where the glue goes. I always try to fold the edges under and glue it to itself, like a folded edge hem, then glue that to the body. Helps to keep fraying and stretching down as you work the edges out. Any where you have to place a hole, glue another layer of material behind the area then make your hole thru both layers. Depending on your chosen material, find a glue that won't discolor or seep thru. A good rubber contact adhesive is usually just fine.