PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: righthandman on September 21, 2015, 04:40:39 PM
-
Been thinking of putting a roller cam in my turbo 2.3.
I guy close by has a 94 Ranger engine with the 8 plug head. Do these have roller cams and if so this cam will work in my turbo head right?
Would I feel a difference in horsepower or how much? Thanks in advance.
-
From everything I have read, the Ranger roller cam will not provide a noticeable difference in horsepower. It is a good reliability upgrade, chance of wiped lobes is greatly reduced.
The 94 Ranger should have a roller cam if it is stock. Some where between 94 and 95, Ford went from 11/32" valve stems to 7mm. The 7mm rockers will not fit over the turbo head's 11/32" valve stems without machining/grinding. The 7mm roller rockers are identifiable by their stamped metal construction versus the earlier 11/32" roller rocker's cast construction.