Not actually a pinto, just pinto parts on a pro-4 race truck. Have a question if someone out there can get me an answer. I have a transmission with a 2.14 second gear with a 7 1/2" rear end that has a ring and pinion 3.73 gear. I run on a quarter mile flat asphalt track and am getting beat down the straights (need more off the corner.) Would changing the rear ring and pinion gear to a 4.11 get me what I need? and also would I need to change tranny to one with a 1.97 2nd gear ratio? Max rpm with what I have is @ 6500. Would this combination put me around 7500 rpm. Run a 15" x 8 Hoosier tire. The engine I have is the 2.3 liter. Engine builder said he had it at 8300 on the dino if this additional info helps you to answer my questions. Any help would be appriciated.